Standard O-Rings EPR with Teflon coating 175° F Max. Temperature

Stainless Steel Female Thread

316 Stainless EPR with Teflon Coating 175° F Max. Temperature

Standard O-Rings EPR with Teflon coating 175° F Max. Temperature

4 000psi Rated 250° F Max. Temperature 3/8″ NPT-M Solid End / Swivel End Molded Vinyl Bend Restrictors Steel Wire Braid for 4:1 Burst Factor

4000Psi 250° F Max. Temperature 3/8″ NPT-M Solid End / Swivel End Steel Wire Braid

Cyclonic air filter with 120% more dust holding capacity and 3x the filter life TransportGuard® Single fuel/ignition shut off system protects the...

1/4 MNPT In/Out Max. 200 F° Stainless steel Max 2500 PSI 10 GPM

This surface cleaner for pressure washers is perfect for cleaning horizontal surfaces, such as decks, patios, sidewalks, driveways, pool decks, etc...

4 000 psi Rated Pressure 1/4″ NPT-M Inlet/ Outlet  Molded Grip

4 000psi Rated 250° F Max. Temperature 1/4"″ NPT-M Solid End / Swivel End Molded Vinyl Bend Restrictors Steel Wire Braid 

Stainless Steel Female Thread

316 Stainless EPR with Teflon Coating 175° F Max. Temperature

Standard O-Rings EPR with Teflon coating 175° F Max. Temperature

Standard O-Rings EPR with Teflon coating 175° F Max. Temperature

4 000 psi Rated 250° F Max. Temperature 3/8″ NPT-M Solid End / Swivel End Molded Vinyl Bend Restrictors Steel Wire Braid for 4:1 Burst Factor

4000Psi 250° F Max. Temperature 3/8″ NPT-M Solid End / Swivel End Steel Wire Braid

30’ 3000psi m22 fittings on both ends

4 000 psi Rated Pressure 1/4″ NPT-M Inlet/ Outlet Molded Grip

4 000 psi Rated Pressure 1/4″ NPT-M Inlet/ Outlet Zinc Plated Round Molded Grip

4 000psi Rated  250° F Max. Temperature 3/8″ NPT-M Solid End / Swivel End Molded Vinyl Bend Restrictors Steel Wire Braid for 4:1 Burst Factor

4 000psi Rated 250° F Max. Temperature 1/4″ NPT-M Solid End / Swivel End Molded Vinyl Bend Restrictors Steel Wire Braid 

4000Psi 250° F Max. Temperature 3/8″ NPT-M Solid End / Swivel End Steel Wire Braid

4 000 psi Rated Pressure 1/4″ NPT-M Inlet/ Outlet Molded Grip

24 feet long 14.2 lbs 3500 psi Rated Pressure 10.5 gpm Max.Flow 195°F Max.Temperature 1/4" QC Outlet Nozzle Holder accepts standard QC Nozzles Lig...

4 000 psi Rated 250° F Max. Temperature 3/8″ NPT-M Solid End / Swivel End Molded Vinyl Bend Restrictors Steel Wire Braid for 4:1 Burst Factor

4000Psi 250° F Max. Temperature 3/8″ NPT-M Solid End / Swivel End Steel Wire Braid

4 000 psi Rated Pressure 1/4″ NPT-M Inlet/ Outlet Molded Grip 

Easy pull trigger Max psi 4500 Inlet: 3/8"  Max gallons per minute (GPM): 8 Max temp 320 Degree F

Ball valve nickel plated 1/2″ 3000 psi

Ball valve nickel plated 3/8″ 3000 psi

High quality up to 4000 psi Single braid Heat rated to 250 F 1/4 I.D.

The PA turbo nozzle delivers faster and deeper cleaning action providing a powerful oscillating jet of water for pressure washers rated up to 5100 ...

Packing seal kit BXD/GXD Gas, water – repair kit by Comet

Coxreels100 Series hand crank hose reels are lightweight, compact, versatile reels that perform at working pressures up to 4,000 PSI. Save time and...

¼ F-NPT Max pressure 125PSI Normally closed   12VDC solenoid